Project Spec E46: Rear Suspension and Other Details

Before reassembling the rear subframe on a Spec E46, you must weld in a rear subframe reinforcement kit. I sourced mine from Condor Speed...

How to Build a Spec3 From a Donor

In the interest of furthering renewed interest in Spec3, the series leader and series director put together a constructors guide for those interested in...

Replacing a Miata Fuel Pump Sock

We all have read time and again that oil is the lifeblood of an engine, but without fuel, the engine doesn’t run, and if...

Building a Privateer GT3 Nissan 370Z

Back in 2018, Valkyrie Autosport’s 370Z wasn’t quite ready for ES. It was still stuck in E0, where it had demonstrated dominant pace on...

Project Spec E46: Rear Subframe, Differential and Fuel Tank

With the cage freshly in the car and the car up on jack stands for the first of a thousand times, it’s starting to...

Beating Exhaust Heat

The factory downpipe from the manifold on NA and NB Mazda Miatas is wrapped with shielding and packed with insulation to keep the heat...

Bracing a Miata Differential

If you want to be competitive in Spec Miata, you need the 4.30:1 Torsen or Mazda Motorsports differential. Most racers simply find a factory...

Project Spec E46: Installing the Roll Cage

Anytime you source out work to a shop, you are on their time schedule, not yours. You are not their only customer, you see,...

How Hawk Performance Developed the ER-1 Endurance Brake Pad

Hawk Performance has provided brake pads, rotors, and fluid for a wide range of street and motorsport applications for the last 32 years. Perhaps...

The Correct Way to Install Adjustable End Links

When it comes to racecars, everyone seems to have a number of passionate opinions about setup, how things work, and that one part that...

RACE COVERAGE

RACE CAR TECH